[Elecraft] Insatll SSB and things go dead - question

[k4zm]

Tim:

Install a scrap resistor lead or piece of solid hookup wire from pin 1 to 
pin 3 on J9 and J10 and install a 103 Cap from pin 7 to pin 12 of J 11 and 
you will be back to what you had before... I would bet you have a problem on 
the SSB board.  I had this on one SSB generator and it was either RFC1 or 
RFC2 that was shorting out to the crystal housing.

73
Jim Younce K4ZM
K2 SN: 18