[Elecraft] what should I hear using cw reverse vs normal?

[Tom Arntzen]

Hi Tim!
If you are 100% zerobeat with the signal u will not nessecary hear any 
difference at all.
cw and cwr is like lsb and usb.
Normal differences will be a little change in the noicepitch due to 
switching sidebands.
In some rare cases where you are troubled with qrm you could try to switch 
opposite sideband ,  e.g. cw to cwr.
Not always , but in some cases you can improve your reception.
Also if you don't hear any difference in pitch of the cw signal when 
toggling between cw and cwr you are 100% on frequency with your qsopartner.

73 de Tom LA1PHA

----- Original Message ----- 
From: <nz7c at cox.net>
To: <elecraft at mailman.qth.net>
Sent: Thursday, February 03, 2005 5:51 AM
Subject: [Elecraft] what should I hear using cw reverse vs normal?


> If I am listening to 10000.00 in vw mode and chenge between cw and cw 
> reverse - what should I hear as a difference and why?  Thanks in advance,
> 73/Tim NZ7C
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>