[Elecraft] Frozen K2

[Don Brown]

Hi

Did you try a master reset. Hold down buttons 3,4 and 5 while powering on. 
If this fixes the problem you will need to run CAL PLL and reset all of your 
filters as well as any other settings you may have made. This resets 
everything to factory defaults. This may clear the lock up.

Don Brown
KD5NDB


----- Original Message ----- 
From: "Rolf" <rolf.gothberg at bredband.net>
To: <Elecraft at mailman.qth.net>
Sent: Friday, December 30, 2005 11:05 AM
Subject: [Elecraft] Frozen K2


>
>     Hi,
>
>     My K2 #4979 has worked fine until now. Suddenly the poor
>     thing appears to be dead. When powered on the display first
>     shows ELECRAFT then 7100.00 and a constant sound hears.
>     It does not respond to any buttons or knobs, except for the
>     power knob.
>
>     I believe that a bad extension cord is to blame. But what can I
>     do get live in my dear friend again? Anyone who knows?
>
>     Best 73s
>
>     Rolf   SM0YQC
>     Stockholm, Sweden
>
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>