[Elecraft] K2/100 AM (MW) Broadcast Intermods on 80m

[Vic K2VCO]

Steve Kavanagh wrote:
> As far as I can see from the manual, the KPA100 T-R
> switch is bypassed in QRP mode. 

No, that is incorrect.  If the KPA100 is installed, the t/r switch is 
active.  Note that the bias oscillator (what I fondly refer to as the 
'birdie generator') is fed from the 12CTL line in the ribbon cable.

If you really want to test this, replace the KPA100 with the low-power 
lid and see what happens.
-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco