[Elecraft] A question about low sensitivity

[k4zm]

Joe:

I suggest that you check the installation of C6 the 4.7 pf disc located on 
the very back of the board between L1 and L2.  This capacitor shouold be 
installed so that there is an empty hole between the two leads.  You 
actually install it in a spot for a jack that is installed if you install 
the 60Meter Module.  Many guys install this capacitor on the two holes 
closest to the left edge of the board and when you do there is no coupling 
capacitor connected between L1 and L2.  This might  not be your problem but 
it is sure worth a quick look see.

73
Jim K4ZM