[Elecraft] K2/100 AM (MW) Broadcast Intermods on 80m

[Vic K2VCO]

Steve Kavanagh wrote:

> Has anyone else experienced this (i.e. is it normal ?)
> or should I be looking for problems in or near the K2
> T-R switching circuitry  ?

If you really can't hear them on a different receiver, check the bias 
voltage on the t/r switch.  It should be between 90 and 150v.  Low 
voltage here can cause this problem.  The t/r switch is used whether or 
not the KPA100 is activated.
-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco