[Elecraft] K2 Frequency Calibration

[Don Wilhelm]

Folks,

Ron just pointed out that I had a faulty liink to my website - try
http://w3fpr.qrpradio.com instead and excuse my fumble fingers.  You can
also find a site mirror at http://home.earthlink.net/~w3fpr - sorry for any
confusion.

73,
Don W3FPR


> -----Original Message-----
>
> Samuel,
>
> I can only add to what Ron has already stated that in addition to
> setting the reference oscillator correctly then running CAL PLL,
> you must also run CAL FIL to store the proper BFO values in the EEPROM.
>
> Take a look at the K2 Dial Calibration article on my website
> http://w3fpr.qrprqdio.com for a complete description of the
> entire process.  The reading is more complex than actually doing
> the procedure.
>
> 73,
> Don W3FPR
>
> >