[Elecraft] 1 antenna, 2 radios... a second prototype !

[JEAN-FRANCOIS MENARD]

Hi,

I did my second «One Antenna, Two Radios» interface. I had this time  
an ajustable RF amplifier to compensate for the loss by splitting the  
signal. I only had what is loss... around 3 dB, no more. The design  
could be used for more than 2 input/output because the gain is  
«ajustable».

I also had a few LED to show the status when TX, ON or even when the  
rf amp is ON. If I disconnect one radio, I am able to switch off the  
amp because there is no more attenuation, so I will keep my signal a  
«original» as it were before.

I really think that I convinced that I can easely add another K2 in  
my shack.... the next step will be... One mic, two radios... and two  
K2's !!!

If you want to take a look...

http://homepage.mac.com/jfmenard/PhotoAlbum57.html

It took me more hours than expected... I like to do thing properly...  
maybe sometime too much, but anyway... it works great !!!

73

=============================================
/¯\/¯\/¯\/¯\/¯\/¯\   JEAN-FRANCOIS MENARD
  V  A  2  V  Y  Z
\_/\_/\_/\_/\_/\_/

FISTS #11896
Elecraft K2 #4130
Elecraft KX1 #999

http://homepage.mac.com/jfmenard
=============================================