[Elecraft] Wire Strippers

[Ron D'Eau Claire]

I'll second Tom's recommendation. I've had a set like those shown in the
links below for 20+ years now. There are other types that are "adjustable"
and cheaper because one tool covers everything but they require setting
something for each size of wire. Slow and not as clean and easy as the plier
type, IMHO.

Also, with the plier type you don't really need to know the wire size. Just
pick up the ones that seem right and, with the jaws closed, put the
insulated wire behind the openings. You'll quickly see which one would allow
the wire through but not the insulation. That's the one to use! 

Ron AC7AC

-----Original Message-----

Hi Matt:

>What is the consensus on a good (or best) wire stripper for stripping 
>the various wires found in the Elecraft kits?
>
>Any suggestions for an automatic hand stripper for 16 to 26 gauge 
>stranded and solid wire?

Not automatic, but excellent:

#30-#20 AWG
   http://www.hakkousa.com/CHPproducts.asp?PID=CSP-30-1&Page=1

#26-#16 AWG
   http://www.hakkousa.com/CHPproducts.asp?PID=CSP-30-7&Page=1

#20-#10 AWG
   http://www.hakkousa.com/CHPproducts.asp?PID=CSP-30-2&Page=1

May be available at a (slightly) lower price from vendors such as 
www.kiesub.com, but no guarantees.

73,

Tom Hammond    N0SS

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com