[Elecraft] No audio from P5

[Roland & Elvie Whitsitt]

The 1st time this happened to me it was because I plugged into the wrong P5! 
on the control board.  Didn't see the one on the RF board.  But that's the 
kind of bone head guy I am.  Ask the list, I needed lots of help. hi hi
Okay, I got past that, but after only two contacts, indeed my head phone 
jack went out.  When I brought it up on the list, it looks like a common 
problem and a weak spot with the k2.  Now like one list member said, "I hold 
my breath everytime I pull my headphone jack out".  But then, looks like 
elecraft is willing to replace it at least until they can come up with a 
replacement.  There's just not anything in between the headphone jack and 
the speaker.  You might try hooking the speaker up via alligator clips to a 
radio or something to eliminate that possibility that something came 
un-soldered.
Roland in Stockton
k2 #3090
----- Original Message ----- 
From: "Rolf" <rolf.gothberg at bredband.net>
To: <Elecraft at mailman.qth.net>
Sent: Sunday, August 21, 2005 4:52 AM
Subject: [Elecraft] No audio from P5


> Hi,
>
> My K2 (#4979) worked just fine untill yesterday. After setting L34 for the 
> best
> signal-to-noise ratio and placing the top cover back onto the chassis I 
> found, all
> of a sudden, that there were no audio from the internal speaker. And there 
> were
> no sound from the external speaker jack either. Now I have only audio from 
> the
> headphone jack. All worked well before. What can possibly have gone wrong?
>
> Rolf   SM0YQC
>
> K2 QRP, KSB2, KDSP2 and K160RX
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com