[Elecraft] K2/100 & 6 meter - CW is not giving any output

[Rob Snieder]

Hi Don, thanks for responding,

Short coax cable between K2 Ant > Txin IF1
Antenna is connected to transverter Ant plug.

Control cable is connected between K2 and transverter

SSB on 6 meter works fine so cables are ok. Keyer is working fine on HF
bands.

Relay is clicking in the transverter when PTT is make by keying my bencher
which is connected to the K2 keyer input jack.

Hope this is more clear now Don.

-----Original Message-----
From: W3FPR - Don Wilhelm [mailto:w3fpr at earthlink.net] 
Sent: 14 August 2005 20:09
To: PA2R via Muurkrant; elecraft at mailman.qth.net
Subject: RE: [Elecraft] K2/100 & 6 meter - CW is not giving any output

Rob,

Please clarify - there is no PTT relay in the K2/100, all transmit/receive
switching is electronic, so there is no relay clicking involved.  Is the
relay clicking from the K2/100 or from the transverter?

Do you have power output from the KPA100 without the 6 meter transverter
connected?  Have you configured the 6 meter transverter correctly?  How are
you driving the transverter (from the K60XV output jacks of from the high
power output from the K2/100)?  In other words, give us the complete setup
information so we can help - all these things do make a difference.

73,
Don W3FPR

> -----Original Message-----
>
> Hello all, maybe someone can help me solving the following issue:
>
>
>
> I have a K2/100 with a 6 meter transverter. I tried to use it
> last night in
> CW and noticed than on CW the K2 PTT relais is switching and the keyer is
> making the dots and dashes but I see no power output. None of the leds is
> going on. In SSB is shows 20 watts.
>
>
>
> A friend of me who has the same setup is experiencing the same.
>
>
>
> Is there something special which needs to be done to enable CW on 6 meter?
>
>
>
> Any help is appreciated.
>
>
>
> 73 Rob PA2R
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.338 / Virus Database: 267.10.8/71 - Release Date: 8/12/2005
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.10.8/71 - Release Date: 8/12/2005