[Elecraft] SSB Microphone Question

[Ian J Maude]

On Sun, 2005-08-14 at 14:52 -0400, Jeff Hetherington VA3JFF wrote:

> I am running the K2 with a Heil HC4/HC5 element in a dual element Heil
> HM10 mic.  I was thinking of trying a preamp while I had the rig on the
> bench, but am I moving in the right direction or is there something else
> I should be focusing on as to the optimization of my SSB signal.

I run a Heil HC5 element with my K2 (#4044) and the mods I used are
simple.  I changed out the capacitors on the SSB board to give me the
2.2k mod and changed R14 on the board to 10k.  These 2 mods are all it
took to get my audio sounding great :-)

Ian
-- 
Ian Maude G0VGS Morecambe Lancs UK | ian at gb7mbc.net
Sysop of GB7MBC, the Morecambe Bay Cluster
Running Linux and DXSpider | K2 #4044

DX and Cluster forums at http://www.gb7mbc.net/forum/