[Elecraft] K2, resistance check Q7

[Erik Linder]

Hi gang,

My reading for Q7 base is too low, but not shorted.
I get 760 ohm...
But I should get 2.5 to 3 k ohm.

I have worked my way through the schematics.
At R62 I get zero one one side and 870 on the other.
At R60 I get 870 and 760.
The low resistance must be somwhere between R60 and Q7 base.

I have removed all passive components that connects to ground: C137, 
C129, C130, C138.

No change.

I don't think any of the T's are shorted, cos I dont see zero ohms.

Please give me some hints if you can, on how I can proceed.

Tnx
SM0RVV ./Erik
K1 #1978
K2 #4904 (at stage III)