[Elecraft] Re: KPA100 question

[john]

I had the same issue (there really should be a note there indicating that 
you need to set the transformer back a hair to allow clearance for this later
step!).

I scooted the resistors forward a bit to solve my clearance problem. It's 
always a good idea to leave a LITTLE air under power resistors, to help 
them dissipate some heat. Mine stood off the board about 1/8" which was 
just enough to allow
me to scoot them forward a tad, to get this cap in.

John K5MO



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 4/21/2005