[Elecraft] K2 QRO & QRP

[Gregg R. Lengling]

You've got it right....just swap lids, no extra parts to order....

Gregg R. Lengling, W9DHI, Un-Retired
K2/100 SN 3075
http://www.milwaukeehdtv.org

----- Original Message ----- 
From: "Mike Markowski" <mm at UDel.Edu>
To: <elecraft at mailman.qth.net>
Sent: Monday, April 18, 2005 2:28 PM
Subject: [Elecraft] K2 QRO & QRP


> I'm aware of the mod to house the 100 W amp externally, but am thinking
> this might not be what I'm looking for.  For the handfull of times each
> year when I run QRP away from home it'd be nice to have the internal
> battery and 20W antenna tuner.  When I'm operating at home, which is by
> far most of the time, I'd use the 100 W stage.
> 
> So the obvious solution seems to be to buy battery, tuner & amp.  After
> looking through the KAP100 manual, p. 20 in particular, I believe all
> I'd have to do is swap the QRO cover with amp for the QRP cover with
> battery and tuner.  Is that all there is to it?  Is there anything else
> I should be aware of regarding dropping back to QRP, especially the
> effects of the (p. 54 KAP100 manual) RS-232 control board modifications?
> 
> Thanks,
> 
> Mike  AB3AP
> Avondale, PA
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com