[Elecraft] K2 VCO Alignment

[W3FPR - Don Wilhelm]

Wayne,

With only that small amount of difference, you are not likely to encounter
any problem even though your BFO low end of the range is a bit high - yes, a
60 Hz difference with an uncalibrated 4 MHz reference is 'splitting
straws' - you may want to check it later 'just for reference', but as long
as you don't run out of adjustment capability when setting the BFOs for the
filters, all is well.

73,
Don W3FPR

> -----Original Message-----
>     -and-
>
> after that, no more funny readings.
> Well, except: BFO Low Freq. measured 4912.76 [should not read
> more than 4912.7] however,  I have not yet calibrated the 4 MHz
> Osc. as my counter needs work.