[Elecraft] K2 #4654 works fine

[Vic Rosenthal]

PA2A Steef wrote:

> since one hour now! One little problem: on 160 and 80 I hear a loud click
> when switching from TX to RX, on the rest of the bands it is not so loud, but
> it is stille there. Probably there is a capacitor under one of the bandpass
> filter relays not completely soldered.

If you have both a KPA100 and KDSP2, see:

<http://www.ac6rm.net/mailarchive/html/elecraft-list/2005-01/msg00997.html>

This problem requires both of the above accessories to be active (you can test 
it by turning down the power to 10 watts or didabling the DSP) and is observed 
more strongly 0n 160 and 80.

-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco