[Elecraft] XG1 battery voltage(s) reference needed

[Rick Commo]

Allen,

I believe that you are correct and figured that my XG1 had too much current
draw.  I will do that as soon as I have the chance.  Right now am just a bit
busy getting a couple of computers built up to replace some boxes that
recently went belly up.  In a couple of weeks I'll be recuperating from some
surgery and plan on having my K2 and some other stuff upstairs with me to
keep me "entertained".  Will do the checking then.

73s & thanks,
-rick, K7LOG

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Allen C. Ward
Sent: Sunday, April 03, 2005 6:22 AM
To: elecraft reflector; bsce74 at centurytel.net
Subject: RE: [Elecraft] XG1 battery voltage(s) reference needed

Rick,
You must have a circuit problem, either there is a bad component, or a
component in the wrong place, a bad solder joint or something in the
oscillator is drawing too much current.
Check U2 for 1.22 volts.  Make sure R9 is correct value.  Check voltage at
the junction of R10 and R11 should be close to 1.5 volts for a good battery.
Allen KA5N
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com