[Elecraft] Errata Recommendation for KPA100

[Jim Harris]

On page 42 of the KPA100 manual, right column about
1/3 of the way down are instructions to temporarily
remove the 160 meter option if it is installed.  The
same needs to be said for the 60 meter option as well.
 The transverter RCA jacks on the rear panel (heat
sink) are attached to the 60 meter PC board similar to
the way the receiving antenna jack is attached to the
160 meter PC board.  

On page 43 near the top left a note similar to that
for reinstalling the 160 meter PC board should be made
for the 60 meter PC board.

If the 60 meter PC board is not disconnected from the
RF board you are going to break or damage it or it's
wiring connected to the transverter RCA jacks.

Have a great day!

Jim, AB0UK


		
__________________________________ 
Yahoo! Messenger 
Show us what our next emoticon should look like. Join the fun. 
http://www.advision.webevents.yahoo.com/emoticontest