[Elecraft] K2/100 power-out change
Tom Hammond
n0ss at earthlink.net
Wed Sep 22 12:31:22 EDT 2004
It IS in the software ALC... reflects the ALC's attempting (at about a
1-seconds rate) to 'stabilize the output at the requested power level...
Seems I recall there being a fairly simply remedy to this problem... at
least to remedy MOST, if not all, of it.
If I recall, it was the addition of a cap somewhere, but (unfortunately) I
don't recall where.
Double check the archives, or maybe someone will offer it up.
73,
Tom Hammond N0SS
At 10:45 AM 9/22/04, Larry Phipps wrote:
>Interestingly, my TS850S does this too... it's a well known bug in the
>TS850. The Kenwood problem is in the ALC circuitry, new rigs don't do
>this... it develops over time.
>
>I'm not familiar with the K2 circuit, but it sounds like it could be a
>decoupling problem.
>
>Larry N8LP
>
>
>----- Original Message -----
>From: Rich McCabe
>To: Elecraft Reflector
>Sent: Wednesday, September 22, 2004 11:23 AM
>Subject: Re: [Elecraft] K2/100 power-out change
>
>
>Sounds like both K2's I have had. 38xx and 44xx. The output jumps all over
>the place. My amp does not like it either. When I posted about it, the
>response I got was that is "normal".
>
>Rich
>
>
>----- Original Message -----
>From: "David J Windisch" <davidw at copper.net>
>To: <elecraft at mailman.qth.net>
>Sent: Wednesday, September 22, 2004 5:17 AM
>Subject: [Elecraft] K2/100 power-out change
>
>
> > Hi, all concerned:
> >
> > I have two K2/100's (34XX and 37XX) which have 40M c-w-mode power-out
> > variations at a rate of about once a second. For example, if I set 40W
> > out,
> > they will alternate from 35 to 40W. It happens on a dummy load, into an
> > antenna, and makes driving an amp interesting ;o)
> >
> > Haven't tried other bands or modes.
> >
> > Anyone else out there notice this?
> >
> > TIA & kind regards,
> >
> > Dave, N3HE
> >
> > _______________________________________________
> > Elecraft mailing list
> > Post to: Elecraft at mailman.qth.net
> > You must be a subscriber to post to the list.
> > Subscriber Info (Addr. Change, sub, unsub etc.):
> > http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/subscribers.htm
> > Elecraft web page: http://www.elecraft.com
> >
> >
>
>
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
>http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com
>
>
>
>---
>Outgoing mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.766 / Virus Database: 513 - Release Date: 9/21/2004
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
>http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com
More information about the Elecraft
mailing list