[Elecraft] BuxComm RASCAL for K2

[W3FPR - Don Wilhelm]

Daniel,

Building one is not as complex as some make it out to be.  Check out my 
website www.qsl.net/w3fpr article on Digital switchbox for the K2.

73,
Don W3FPR

----- Original Message ----- 
From: "Daniel Reynolds" <aa0ni at yahoo.com>
To: <elecraft at mailman.qth.net>
Sent: Monday, September 20, 2004 4:37 PM
Subject: [Elecraft] BuxComm RASCAL for K2


> I'm looking at diving into PSK-31. I could build my own interface, but my 
> time
> is pretty valuable, and I'd like to be up and running right away with the 
> least
> amount of frustration.
>
> It looks like the RASCAL is the least expensive option for hooking up a
> transceiver to the computer soundcard for modes like PSK-31. I'm using the 
> K2
> hand mike and would like to know which RASCAL cable I should order (I 
> probably
> should read the KSB-2 manual for this answer).
>
> Thanks in advance,
> Daniel / AA0NI
> K2 #3421
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.): 
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>