[Elecraft] KFL 1-4 question

[Don Brown]

Hi

The KFL1-4 should come with both crystals. Yes you will need to install the 18.1000 MHz crystal for the 10.100 MHz band and 80 KHz span.

Don Brown


  ----- Original Message ----- 
  From: Tom Juelich<mailto:tomjay at web.de> 
  To: elecraft at mailman.qth.net<mailto:elecraft at mailman.qth.net> 
  Sent: Monday, September 20, 2004 5:14 AM
  Subject: [Elecraft] KFL 1-4 question


  Hello Elecrafters,

  I am planing to build a KFL 1-4 soon and I am just going through the parts inventory
  of my kit.
  I have included  as Xtal X3 18.000MHz and it is said this Xtal is for 10.0 Mhz band.
  But I would like to have the 10.1 MHz band here in Europe of course.
  My K1 (2 bander #1434) is set for 80kHz range.
  So my question is: Do I need the other Xtal which is 18.100 Mhz (not supplied in the kit)
  or can  I tune the board to my desired frequency range with that included 18.000MHz Xtal?
  Many thanks for any help!
  73 de Tom, DL2HRF



  _______________________________________________
  Elecraft mailing list
  Post to: Elecraft at mailman.qth.net<mailto:Elecraft at mailman.qth.net>
  You must be a subscriber to post to the list.
  Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft<http://mailman.qth.net/mailman/listinfo/elecraft>    
  Help: http://mailman.qth.net/subscribers.htm<http://mailman.qth.net/subscribershtm>
  Elecraft web page: http://www.elecraft.com<http://www.elecraft.com/>