[Elecraft] Switches

[G3VVT at aol.com]

After the damage experience when carelessly placing a hot  soldering iron in 
the wrong place, I would move the installation of the key caps  from the top 
of page 26 (with fig 5-8) to page 31, to be done  after installing the 4 wires 
needed for connecting Z1, the optical  encoder and before the removal of the 
protective film from the LCD. The caps are  then in place just before the front 
panel PC board and the front panel are  assembled together.
 
Bob, G3VVT
K2 #4168