[Elecraft] K1 on 80 meter 300 KHZ ?

[Mike Morrow]

I wrote:

>(1) The K1 can store in its MPU system only *one* LCD frequency display
>calibration adjustment *per band*, so you could only calibrate the display
>for one ot the two 80m bands on the board.


By "one ... per band" above, I meant "one ... per amateur band" and not "one
... per K1 band."  If you calibrate the display for 80m, then any K1 filter
board band (even on a completely different filter board) that you later
assign to 80m will use that previously set calibration adjustment for 80m.

73,
Mike / KK5F