[Elecraft] No audio

[redmen1969 at optonline.net]

I just went through a computer upgrade and Murphy had his way with me, including losing audio out of the K2 to the sound card.

I guess you've removed the plug from the headphone jack and that it hasn't accidently been pushed all the way into  the rig (cutting off the audio to the speaker).  

As I think someone else posted, you may want to look inside the rig to make sure the headphone jack is not stuck in the cutoff position.

Good luck and let me know what develops.
Tom WB2QDG
k2 1103



----- Original Message -----
From: "Carter W. Craigie" <n3ao at comcast.net>
Date: Sunday, May 23, 2004 9:01 pm
Subject: [Elecraft] No audio

> I turned on my K2 this afternoon to find NO audio on receive.
> 
> The last time I used the rig I was on PSK-31, and everything 
> worked just
> fine.
> 
> I haven't moved the rig. I can tune the various antennas I use.  I 
> justcan't hear anything, no static, no band noise. I changed the 
> lids, going
> back to my QRP lid, and still no receive.
> 
> Any ideas?
> 
> 73,
> 
> Carter
> 
> -- 
> Carter Craigie N3AO
> K2/100 s/n 678
> K1 s/n 159
> KX1 s/n 119
> All my Email is scanned by Norton AntiVirus
> -- 
> 
> 
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/elecraft
> You must be a subscriber to post.
> Elecraft web page: http://www.elecraft.com
>