[Elecraft] Control board query

Wed Mar 31 08:37:00 2004

Hi

The jumpers are installed on the top of the board and soldered on the =
bottom. If you have the KAF2 or KDSP2 then you can go ahead and install =
the 5 pin and 3 pin connectors supplied in the KAF2 or KDSP2 kits. Then =
bend two clipped resistor leads to fit into the connectors in the same =
position as R18 and R19. This will allow you to test the control board =
and the rest of the K2. When it is time to install the KAF2 or KDSP2 =
just pull out the jumpers and plug in the  KAF2 or KDSP2. I usually =
install all of the option connectors when building a K2 even if the K2 =
does not have that option installed. The connectors are cheap and can be =
ordered from the Elecraft parts department.  This makes the installation =
of any future options much easier. =20

Don Brown
KD5NDB

  ----- Original Message -----=20
  From: Frank Hunter<mailto:[email protected]>=20
  To: [email protected]<mailto:[email protected]>=20
  Sent: Wednesday, March 31, 2004 3:18 AM
  Subject: [Elecraft] Control board query

  The jumpers at r18 and r19, are they mounted on the top of the board =
and=20
  soldered on the topside or are they mounted on the bottom of the board =

  and then soldered on the topside?

  73 de Frank
  --=20
  "Today is a good day to die" - Anon: Klingon

  _______________________________________________
  Elecraft mailing list: =
[email protected]<mailto:[email protected]>
  You must be subscribed to post to the list.
  To subscribe or unsubscribe see: =
http://mailman.qth.net/mailman/listinfo/elecraft<http://mailman.qth.net/m=
ailman/listinfo/elecraft>
  Elecraft Web Page: http://www.elecraft.com<http://www.elecraft.com/>
  Also see: =
http://www.elecraft.com/elecraft_list_guidelines.htm<http://www.elecraft.=
com/elecraft_list_guidelines.htm>

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---