[Elecraft] KAT100-2 Question

[K7MAS]

Hello All:

I'm finally getting around to building the KAT100-2.  It's been on the =
shelf for way too long.

In looking at Revision C of the manual, I note that three (3) capacitors =
have changed values.  C50 and C51 are changed from .001uF to .01 uF 50V; =
and C56 is changed from .001uF to .047 uF 50V.  My question is:
=3D=3D> I found some old capacitors of the right capacitance rating in =
my "Elecraft left over box", but the markings are not identical to the =
ones supplied with the KAT100-2.  I'm concerned about the voltage =
rating.  I'm not sure the old capacitors are 50V.  Should I use them, or =
get replacements from Elecraft??

Thank you in advance.

73, Mark, K7MAS
K2-100 #874

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---