[Elecraft] K24U Transceiver RS-232 Control Software 1.0.0 Beta testing

[Jerry]

K24U is a software application that will control a K2 Transceiver via an
RS-232 communication port.=20
You can find a link to the beta version at:=20
=A0
http://bellsouthpwp.net/j/a/jadejasz/kc4ydp_main.htm=A0
=A0
*****************************************
=A0
The beta testing of K24U software has been in progress.=A0 Elecraft has =
not
responded to the software other than their current work loads would not
permit testing at this time. The little response I have received from =
the
user community on this software may be an indication that the project =
should
be dropped.=20
=A0
This is the list of testers who have responded.
=A0
4Z4TL, Isaac
K2VCO, Vic
K8AA, Dave
KK7SS, Dave
N5QVF, Dario
W1DRY, Mike=20
WG4S, Dan=20
=A0
Revisions Made
=A0
N5QVF reported MSCOMCTL.OCX missing in the loader program. - Fixed
K8AA (and others) reported SWAP misspelled. - Fixed
K2VCO reported the window is too large for 800x600 - Fixed
K2VCO Noise blanker locks VFO - Fixed
K2VCO REV Button doesn't work properly - Fixed
K2VCO Power control below 10 watts doesn't deactivate the KPA100 - Fixed =

=A0
These revisions have been loaded in the latest download and available =
at:
=A0
http://bellsouthpwp.net/j/a/jadejasz/kc4ydp_main.htm=A0
=A0
=A0
Revisions In Work
=A0
Set the mouse wheel and assign it to the VFO dial requested by W1DRY.
Allow for 6 (six) transverters requested by KK7SS.
Allow for user defined macros requested by NA8M.
=A0
=A0
I want to thank the beta tester for their response, and I apologize if I
have left anyone out.
=A0
73=92s Jerry KC4YDP
=A0