[Elecraft] Anderson Connectors ARES Standard

[Trent - N7GMT]

Exactly "correct":

Red on LEFT looking *into* the connectors (from the pluggable side), or
Red on RIGHT looking down the wire *at* the connectors.

Tonuge down in either case.

These are known as California Reverse Anderson Polarity compliant ARES
connectors (since CA chose to use <ahem> a "different" configuration for
Anderson Powerpoles for their ARES connectors, than had previously been
chosen -- and implemented many years earlier -- other ARES groups in
other states.  CA is bigger, and bigger aparently rules, I guess.)


----- Original Message ----- 
From: "Robert" <krcrocker at verizon.net>
To: <elecraft at mailman.qth.net>
Sent: Monday, June 28, 2004 11:03
Subject: [Elecraft] Anderson Connectors ARES Standard


The correct connection is while looking down at the connectors to have
RED
RIGHT TONGUE DOWN.

Looking at the front end of the connectors the RED will be on the left
and
the TONGUE will be down. That is how the pre wired cable extensions  and
Rig Runners are wired.

Robert
WN7O



------------------------------------------------------------------------
--------



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.711 / Virus Database: 467 - Release Date: 6/25/04



------------------------------------------------------------------------
--------


_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft    Help:
http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com