[Elecraft] Field Day report

[David Katinsky]

I'm pretty sure I've made the same mistake during my build process. Thanks
for the tip!


-- 

"It takes brains. It's not like forward, where you can get away with
scoring and not play defense... On defense you have to be thinking."
---Chris Chelios

David M. Katinsky
dmk at pobox.com
N2RDT


> From: Robert McGwier <rwmcgwier at comcast.net>
> Date: Mon, 28 Jun 2004 14:02:29 +0000
> To: Elecraft Mail <Elecraft at mailman.qth.net>
> Subject: [Elecraft] Field Day report
> 
> The other gotcha for me is reading what to do with the
> 4.7 pf on the back edge stuck in as a hole filler where
> a three pin jumper goes.  I would change the instruction
> manual to read:  If looking from at the RF board from
> the front panel side, then left pin is 1 and right pin 3,
> solder the capacitor into holes 1 and 3.  I put it in the
> pins near the OUTER EDGE, misinterpreting the instructions.