[Elecraft] KAT100

[Ian J Maude]

Hi all,
Just finished building my KAT100 and it seems to be working fine!  Just
one question though.  The book mentions to tune c31 for lowest voltage
on pin 3 of U5 and also mentions that it should be as close to 0v as
possible.  I could get it nowhere near this, best at around 1.6V.  I can
get the target voltages ok on R3 and R4 so it seems this is ok but I
find the reference odd.

Any pointers?

Ian

-- 
Ian Maude G0VGS Morecambe Lancs UK | ian at gb7mbc.net
Sysop of GB7MBC, the Morecambe Bay Cluster
Running Linux and DXSpider | K2 #4044
 
Find out about Summits on the Air!  
Visit the SOTA web site at http://www.sota.org.uk