[Elecraft] DSP Filter?

[Don Wilhelm]

Folks, I guess I just started removing the KAF2 for filter aligment when I
first had to deal with it - then I just continued doing the same 'safe'
thing with the DSP2.  Since I don't use the KDSP2 on a regular basis, I will
bow to the advice better experts.
73,
Don W3FPR

"Life is what happens when you are making other plans"
(John Lennon wrote it in a book, Mike Cross used it in a song - I don't know
who was first)

----- Original Message ----- 
From: "Vic Rosenthal" <vic at rakefet.com>
To: "Don Wilhelm" <w3fpr at arrl.net>; "Elecraft" <elecraft at mailman.qth.net>
Sent: Wednesday, June 09, 2004 3:50 PM
Subject: Re: [Elecraft] DSP Filter?


> Don Wilhelm wrote:
>
> > The DSP has the low
> > pass filter in place all the time and will cut off the high frequency
end of
> > the Spectrogram display with these wider filters.
>
> I don't think this is true, Don.  The default filter 1 is a LP filter,
> but turning off the DSP disables it.  The KAF2, on the other hand, DOES
> have a hard-wired LP filter which you need to turn off with the slide
> switch on the KAF2 board (or remove the board, as you suggest) when
> aligning SSB filters.
>
> -- 
> 73,
> Vic, K2VCO
> Fresno CA
> http://www.qsl.net/k2vco
>
>
>