[Elecraft] K2 Troubleshooting

[Bob Miller]

Scott,

If you aren't seeing anything on LCD display, go back and check the
soldering on the display.  The pins are not really long enough and just
barely protrude through the board. I had a problem with part of my LCD and
that was the problem. You may want to solder from the top of the board to
ensure you have contact with the circuit board.

Bob
WB6KWT
----- Original Message ----- 
From: "Scott Cashel" <KJ5ME at comcast.net>
To: <elecraft at mailman.qth.net>
Sent: Thursday, July 29, 2004 9:55 AM
Subject: [Elecraft] K2 Troubleshooting


Good Day,

I have completed the assembly of the control board, front panel, and initial
rf board
and assembled same. On power up the background illuminates and some clicking
occurs but
nothing else. I have disassembled and rechecked component locations and
retouched the
solder connections several times. Although I can find nothing wrong I
obviously have made
errors somewhere. I am not an engineer and I appear to be in over my head.

Please Help!

Scott Cashel
KJ5ME
Arlington, TX
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com