[Elecraft] K2 #4130 power output result
JEAN-FRANCOIS MENARD
k2 at cima.ca
Fri Jul 16 12:07:47 EDT 2004
Now, after a little technical briefing by Tom N0SS and Gary AB7MY
(thanks),
There are my K2 power output results using the DL1 dummy load when
applying the formula written in the build sheet of the DL1 and my VMM
set to DC.
BAND Power set on K2 @ 5W Power set on K2 @ 10W
160M (1.9 Mhz) 5.2W 10.9W
80M (3.750 Mhz) 5.3W 10.8W
40M (7.070 Mhz) 5.5W 11.0W
20M (14.100 Mhz) 4.5W 9.5W
15M (21.200 Mhz) 4.9W 9.3W
10M (28.500 Mhz) 4.3W 8.6W
Is it these values are in the average with most builders ???
===============================================
Jean-François Ménard / VA2VYZ
k2 at cima.ca
Elecraft K2 #4130
Amateur Radio Club of Sherbrooke, Quebec, Canada
Web site: http://homepage.mac.com/jfmenard
===============================================
More information about the Elecraft
mailing list