[Elecraft] RE: K2 4039,

[Don Brown]

Hi

Actually the K2 will do this with a very high current. The self resetting fuse will open at high current then when it resets the K2 will re-power up giving the reset indication

Don Brown



  ----- Original Message ----- 
  From: JEAN-FRANCOIS MENARD<mailto:k2 at cima.ca> 
  To: elecraft at mailman.qth.net<mailto:elecraft at mailman.qth.net> 
  Sent: Saturday, July 10, 2004 10:58 AM
  Subject: Re: [Elecraft] RE: K2 4039,


  SNIP

   
  Seems to me that a defective part should not do what you say, like a 
  reset when you set higher power. So it must be a bad solder.... I hope 
  for you.

  SNIP