[Elecraft] Re: Transverters

[Martin]

If you have the internal antenna tuner installed in your K2, here is a
different approach to hook up a transverter:

Use ANT 2 for the Transverters IN/OUT and set the maximum power to the
required level in the menu.

If your transverter has split connections for Input/Output, you need
the 160m/RX-Ant option.

In this case, use ANT 2 to drive the transverter and RX-Ant for the
RX-path of your transverter.
This setup worked here for 2 years now with a 50 Mhz Ten-Tec
Transverter and 2 SSB-Electronic-Transverters for 2m & 70cm .


-- 
Best regards,
 Martin

K2 #2706                            mailto:dl1iaq at gdxf.de