[Elecraft] Elecraft K2 #4355 is just about finished.

[Don Wilhelm]

Brian,

My recommendation is to build the SSB option first.
After the SSB option is installed, you can do all the filter alignments and
be finished with it so you can enjoy the receiver while building the KPA100.

The options that impact the base K2 alignment are the KSB2, K160RX and the
K60XV - so if you have these options, build and install them and then do a
complete alignment.  The other options don't require re-alignment of the
base only the adjustments to the new option itself.

73,
Don W3FPR

----- Original Message ----- 

> On Mon, 2004-07-05 at 22:44, Hisashi T Fujinaka wrote:
> > Now, what order do I put together the SSB, 60M kit, and KPA100?
>
> I'm still trying to decide in which order to build the SSB and the
> KPA100. I figure I should do the KPA100 first, because 15W isn't much on
> SSB, but then I also figure I could build the SSB first and use it for
> PSK31... I'll probably end up doing the SSB  first just because it'll
> take less time.
>