[Elecraft] K2 S Meter

JEAN-FRANCOIS MENARD k2 at cima.ca
Sat Jul 3 19:23:02 EDT 2004


It's not me that have problem... it's David KR4OW

Mine works fine, really fine !!!

Le 04-07-03, à 15:41, Dale Boresz a écrit :

> Hello Jean-Francois,
>
> Also, be sure that the AGC is in fact turned ON. To be certain that 
> it's on, simply tap the AGC button once. If it was previously off, 
> that will turn it on, and if it was on already, it will simply change 
> the AGC time-constant from either fast to slow, or the other way 
> around.
>
> If you are concerned that you never see more thatn one of the S-Meter 
> LED's lit at a time, then you most likely have the "DOT" mode 
> selected, as opposed to the "BARGRAPH" mode. To change it, locate the 
> "GRPH" menu item on the Primary Menu. You'll notice three possible 
> settings for GRPH:
> bAr (Bargraph)
> OFF (No S-Meter LED's will be displayed)
> dOt (Only a single LED at a time will be displayed, as a power-saving 
> feature)
>
> If you select "bAr" you should see all S-Meter LED segments lit when 
> the right-most LED is lit.
>
> Hope this helps.
>
> 73, Dale / WA8SRA
>
> JEAN-FRANCOIS MENARD wrote:
>
>> Be sure to turn the RF Gain fully clockwise and counterclockwise as 
>> describe in the manual when ajusting S Lo and S Hi.
>>
>> Le 04-07-02, à 23:57, David N. a écrit :
>>
>>> Hello all I am at the test 1 phase of the build
>>> The problem I am having is that when I set the Slo or
>>> SHi the far right dot is the only one lighting up.
>>> It says in the manual that (Slo) the far left led
>>> and it is on 10. I double checked my agc and it is at
>>> 3.80 so that is not in question is there something
>>> I am overlooking?? if so what? or am I looking at a
>>> mistake in one of my steps?
>>> Thanks
>>> David KR4OW
>>>
>>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.): 
> http://mailman.qth.net/mailman/listinfo/elecraft    Help:  
> http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
===============================================
Jean-François Ménard / VA2VYZ
va2vyz at rac.ca

Club d'Astronomie Amateur de Sherbrooke
Club Radio Amateur de l'Estrie

Mon site web personnel : http://homepage.mac.com/jfmenard
===============================================



More information about the Elecraft mailing list