[Elecraft] K2 Modifications for use with the KPA100

[Don Brown]

Hi

I believe all of this has been incorporated into the newer manual and =
>3000 S/N K2's. You should find a place for D8 on the bottom of the RF =
board.

Don Brown=20
  ----- Original Message -----=20
  From: Jerry Ford=20
  To: Elecraft@mailman.qth.net=20
  Sent: Thursday, January 15, 2004 10:39 AM
  Subject: [Elecraft] K2 Modifications for use with the KPA100


  Good morning all:

  Just curious about something.       I'm building K2 #3951.       I
  received a packet of parts and an instruction sheet to change some of
  the supplied parts to improve the VFO / ALC circuit.

  I'm looking at Part II    of these instructions:

   R&R       C154,  R10,  & R16.          New values will be      C154 =
=3D
  100pF ( 101 )
   R10 =3D  470 ohm          R16 =3D 100K ohm

  These are the same values installed per the build instructions in the
  manual.      So,  I don't have to switch them ( assuming the manual
  has been updated since this mod came out )

  In the mod instructions,   D8   appears to be an add-on.       Has
  this also been addressed somewhere in the manual or is it still a
  required all-on???

  Thanks gang:

  73                Jerry          N0JRN
  FP # 546, 4SQRP,  ARS # 923,   ARCI # 11049,   ARRL,
  Springfield,  Mo.  MP +   #8
  http://home.mchsi.com/~n0jrn


  _______________________________________________
  Elecraft mailing list: Elecraft@mailman.qth.net
  You must be subscribed to post to the list.
  To subscribe or unsubscribe see: =
http://mailman.qth.net/mailman/listinfo/elecraft
  Elecraft Web Page: http://www.elecraft.com
  Also see: http://www.elecraft.com/elecraft_list_guidelines.htm


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---