[Elecraft] Re: FL1 OP1

[Dan Presley]

I wanted to thank those who offered advice on my OP1 ssb filter 
dilemma. What I ended up doing ( and fixed it!) was going back to the 
ssb adapter manual and re-entering the bfo frequency for FL 1 OP1 as 
listed in table 3. It had moved off of the correct setting, and once 
I re entered it, it worked fine. Lesson to myself-when in doubt, read 
the instructions! I also did the dial alignment with WWV, but 
couldn't get real close. I never was able to get the readings from 
TP1 and TP2 to match. Not a problem for now-another day.
-- 
Dan Presley-N7CQR-Portland, Or QRP-L #502
n7cqr@arrl.net