[Elecraft] KPA100

[Tom Hammond]

Hi Rob:

At 02:00 AM 1/3/04, Robert Fanfant wrote:
>Does the amp get hot enough to damage the capacitors located at the bottom 
>of the board if they are in contact with the heatsink? A few of my caps 
>are pretty darn near the heatsinkbut I'm concerned about damaging the caps 
>by bending then back to have lower profiles.

Shouldn't be a problem! It'll shut down LONG before any radiated (or 
contact) heating of the caps should be a problem.

73,

Tom Hammond    N0SS