[Elecraft] RE: Low Xmt Audio

[DAVE HEALY]

Thanks, Don...I ran it again and moved each reading a little and reset, =
but it's still the same.  No ALC or RF action on s-meter but there is =
audio there as heard in my other receiver.

Also thanks to all for the Spectrogram links, got it loaded but either a =
poor jumper of bad mike input is limiting the signal in Spectrogram.  At =
full volume it is just above the noise BUT I can see that the bandpass =
is skewed radically.  Hopefully going to R.Shack today for another =
jumber cord and that may help.

Even if this turns out to be a bad mike, I'll have learned how to align =
the radio.

Thanks to all of you for taking the time to help.

73,  -dave- N7DKK

Dave,
Take a look at step 3 of the K2 dial calibration article on my website
www.qsl.net/w3fpr.  There you will find information on Spectrogram and
several links for additional information - among them is how to get
Spectrogram 5 which is the last freeware version - it is still =
available.
73,
Don W3FPR


Thanks Jim & Fran.

I just set up the filter and bfo per the ssb manual but no real =
improvement.

Guess it's time for spectrogram, yes?

I'll go look for it, the last time I looked it was a free program but =
only
for 10 days and it may take me longer than that.  Plus I'll have to do =
some
digging on it's setup and use.

Thanks again for the help!

73,  -dave- N7DKK

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---