[Elecraft] Remote KPA & KAT

[Don Wilhelm]

Bill,

Yes, do the KIO2 first, but check out the instructions for mounting the
KPA100 in the EC2 while you are building it - the inductors on the KIO2
connector/header board must be changed to toroids or other chokes that will
carry the additional current.

Other than that, I can think of no other particular order, but you may want
to build the KPA100 before the KAT100 so you can check out the tuner at full
power.

73,
Don W3FPR

----- Original Message -----


> Greetings & HNY to members of the list -
>
> Here's a question for those who have built up the KPA & KAT in the EC-2
enclosure.
>...
>
> My question for those who have gone through this is if there is a
recommended order
> of construction that makes integration and/or check-out of the various
components easier
> or more logical.
>