[Elecraft] IO Problem

[Don Brown]

Hi

Check the sidetone. If it is gone also then the sidetone source is set wrong. The sidetone and data out are selected with this menu function and if they are set wrong neither will work. Go into the menu and select sidetone level adjust. Then tap the display button until U8-4 is displayed. Then you should hear the sidetone and the RS-232 should now work.

Don Brown




  ----- Original Message ----- 
  From: N5MF<mailto:n5mf at dfn.com> 
  To: elecraft at mailman.qth.net<mailto:elecraft at mailman.qth.net> 
  Sent: Thursday, December 23, 2004 8:59 AM
  Subject: [Elecraft] IO Problem


  I have an unusual problem may some one can help with

  My K2/100 has stopped talking to my computer.  

  I have tried 2 computers thinking it was the serial port but no

  I redid the cable and still nothing

  Finally I changed the amp lid with the QRP lid and it all works fine.

  I have a KAT 100 tuner as well and the rig does talk to the tuner and everything on the amp and tuner works.  ie power, tune, antenna switching.  The rig just doesnt talk to the computer.  Like I said it works with the IO on the qrp lid and the settings on the computers are correct and the IO is on on both the KIO and the K100

  Any thoughts

  Mark
  N5MF
  _______________________________________________
  Elecraft mailing list
  Post to: Elecraft at mailman.qth.net<mailto:Elecraft at mailman.qth.net>
  You must be a subscriber to post to the list.
  Subscriber Info (Addr. Change, sub, unsub etc.):
   http://mailman.qth.net/mailman/listinfo/elecraft<http://mailman.qth.net/mailman/listinfo/elecraft>    

  Help: http://mailman.qth.net/subscribers.htm<http://mailman.qth.net/subscribershtm>
  Elecraft web page: http://www.elecraft.com<http://www.elecraft.com/>