[Elecraft] K2 AGC voltage question

[Marinos Markomanolakis, M.D.]

Hi to all and season's greetings.
I am in the process of building my K2/100, and have almost finished the RF board of the basic kit. Went through the alignment parts I and II with no problem but have a question regarding 1 reading:

1) During the AGC threshold adjustment (control board) the instructions call for adjustment of the potentiometer R1 until the voltage at the lead# 5 of U2 reaches 3.80V. In my case, the voltage can go to a max value of 3.78V with the R1 being fully counterclockwise. 
Since the difference is only .2V from the required value, I do not really know if this finding has any importance or needs to be addressed.

Any advice would be greatly appreciated.
Marinos ki4gin