[Elecraft] My problem: I forgot to remove C-167

[W3FPR - Don Wilhelm]

Web,

Take a look at the K2 dial calibration article on my website 
www.qsl.net/w3fpr for detail information about setting the calibration.

73,
Don W3FPR

----- Original Message ----- 
>
> One problem remains, and that is the dial readout
> is .06 MHz high. In other words, I had to dial up to
> 14.300.06 to be on 14.300.00. I will look in the
> troubleshooting guide when I get home from work
> today to see if it addresses this issue. Everything
> else is _perfect_!
>
> I found an unbuilt KPA-100 module for a reasonable
> price, and will be adding that soon. What a radio!
>
> 73, -Web Williams in Myrtle Beach, SC
>