[Elecraft] KX1 Controls

[Leigh L. Klotz, Jr.]

Thank you both.

Maybe just the foam part in just the lid, as I already have the KX1 in a 
waist pack.

I am fooling around with the machine shop program trying to design an 
economical clear polycarbonate (Lexan) clamshell cover.  I have the mold 
for the basic clamshell shell done, and  they price out to about $20-$25 
in small quantity...but getting 25 people to pay up front may be more of 
a pain in the rear than using the suggested Preparation H container, hi 
hi.

KD6WYK suggested I contour it so it is low on the left over the LEDs and 
buttons and rises up on the right over the knobs.

See http://wa5znu.org/log for the rendering of the vacuum mold.  (The 
part would be formed along the inner surface.)

Leigh.

On Thu, 26 Aug 2004 10:02am, Mike Morrow wrote:
> The KX1 needs a custom clamshell that can be snapped over the top.
>

On Thu, 26 Aug 2004 11:05am, Bob Baxter wrote:
> If you want to see one man's solution go to
> <http://www.arsqrp.com/ars/pages/back_issues/2003_text/1103_text/N7CEE.html>
73,
WA5ZNU Leigh