[Elecraft] N0SS' Ham Radio-related files moved to N0SS.NET

[Don Brown]

Hi

I still have a few noise generator circuit boards left. This is almost the same circuit as Tom's and was the noise generator I sold  as a kit a while back. I would recommend the the Elecraft N-Gen kit now but if you want one of my boards the board is $10 with instructions. You will need to find the parts as I am no longer kitting this circuit. The board needs 3 transistors 2n3904 or 2n2222 5 resistors and 4 capacitors. You will also need a 9 volt battery, switch BNC connector and a box. It will fit into an Altoids box. Again this is only the circuit board and instruction sheet. The circuit board is FR4 fiberglass silk screened and solder masked. I have eight left. If you want one send a self addressed stamped envelope (2 stamps) and $10 cash, check or money order to

Don Brown
19132 Falls Creek Drive
Flint, Texas 75762


  ----- Original Message ----- 
  From: JEAN-FRANCOIS MENARD<mailto:jfmenard at mac.com> 
  To: Tom Hammond<mailto:n0ss at earthlink.net> 
  Cc: elecraft at mailman.qth.net<mailto:elecraft at mailman.qth.net> 
  Sent: Sunday, August 22, 2004 9:05 AM
  Subject: Re: [Elecraft] N0SS' Ham Radio-related files moved to N0SS.NET


  I'm trying to download "Noise Source for aligning IF filters. PC board 
  layout, schematic & spectrum analysis" and I get a 404 Error.

  Le 04-08-22, à 02:01, Tom Hammond a écrit :