[Elecraft] re: KRC2 Configuration

[Brendan EI6IZ]

On Fri, 2004-08-20 at 10:38 -0700, Jack Brindle wrote:
> On Apr 14, 2004, at 10:19 AM, "Brendan Minish" <ei6iz at oceanfree.net>

> > want short presses of the F1 to f4 buttons to trigger the K2's memory
> > keyer playback.
> >
> Yes. You don't even need to reconfigure the box to do it. Simply 
> install jumper W8 to disable key presses. This is described on page 20 
> of the KRC2 manual.
> A second way is to install the Accessibility upgrade which has all 
> sorts of functions, but no sending of CW message from the K2 memories.
> 
> -Jack Brindle, WA4FIB


Jack, the problem with that method is that it disables ALL key presses.

I want to be able to select alternative antennas by using the F1 and F2
Buttons. (& being able to use short presses for this would be nice too but that
will have to wait for the KRC2 Utility )

In the mean time I was told how to clear the K2 keyer memories. enter
programming mode for the memory you want to clear. send one dit and
press the mem button before the counter increments down from 250 to 249.
You have to be quick.

The KRC2 utility is badly needed, I can think of lots of things I could
get it to do.. If only I could configure it :-(

Is anyone writing a utility for the KRC2 ? If so I can offer my services
to help test it under windows or linux.

Is there any information on how to program the KRC2 available any
place ? 

 73
Brendan EI6IZ 
-- 
Brendan EI6IZ <ei6iz at oceanfree.net>