[Elecraft] Transverter question

[Trevor Day]

I don't have an 850S, but you could try an external negative dc supply 
(say -9v to 0v) on the radios ALC input.  That should vary the output 
from zero upwards.

Most of the Kenwood range have a Din socket transverter port on the rear 
apron which outputs a couple of milliwatts or so although I suspect this 
may be too little drive for the 222 or you would be using it :-)

gl
Trev G3ZYY

In message <002901c486d1$d701e910$0300a8c0 at DESK>, W9DHI 
<w9dhi at ameritech.net> writes
>I'm helping a friend out who bought a 222 transverter from Elecraft but
>wants to use it with his TS850S.  The 850 will only go down to 9 watts and
>the Elecraft wants a max of 8 watts, any help out there???
>
>
>Gregg R. Lengling, W9DHI, Retired
>Administrator http://www.milwaukeehdtv.org
>K2/100 S#3075 KX1 S# 57
>Member:  ARRL, RSGB, RCA, WERA and ORC
>
>
>
>
>
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.): 
>http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com
>

-- 
Trevor Day
SIP: 84411998 at voiptalk.org